Custom furniture · LUX HOMES
Ndihmojmë në krijimin e mobilieve sipas projektit — me përmasa, materiale, ngjyra dhe detaje të përshtatura me interierin, funksionin dhe mënyrën se si hapësira duhet të punojë.
Punojmë me klientë privatë dhe me arkitektë, dizajnerë, hotele, zyra dhe projekte B2B më të mëdha.
Good custom furniture should not look added afterwards. It should look as if it had been part of the architecture from the beginning.
A standard catalogue often stops before the niche, the wall colour and the way things are stored. Made-to-measure furniture makes sense when the space, the function or the material needs another solution — not as display, but as a precise fit.
Unusual dimensions
Room proportions
A specific function
Storage
Material concept
Colour palette
Architectural constraints
The required level of making
The scope follows the brief: one piece, a built-in wall, or a series of pieces for a home, hotel or office. What is possible depends on the manufacturer and the project.
Home
Wet rooms and upholstery
Business and hospitality
Made-to-measure dimensions are only the start. Depending on the manufacturer and the project, material, finish, colour, veneer, lacquer, upholstery, hardware, base, configuration and internal layout can be specified.
What is possible is defined by the specific manufacturer and project. Not every partner covers every combination.
Wood, stone, metal, textile, glass and lacquered surfaces are chosen toward the interior, not as a separate catalogue. Actual availability is confirmed per piece.
Oak, walnut, veneer and other suitable wood finishes — for warmth and structure.
Marble, travertine and engineered stone where a top or a detail requires it.
Brass tones, blackened metal and decorative metal finishes for hardware and bases.
Upholstery fabrics, bouclé, linen-like textures and velvet when soft furniture is part of the project.
Clear, smoked or decorative — in vitrines, tops and doors.
Smooth or saturated surfaces when colour needs to follow the wall or the concept.
This is not cheap versus expensive. It is whether a ready-made piece fits the space.
Standard product
To project
Specification
Lead times, quantities and logistics are confirmed in the offer. We do not publish a universal production time.
01
Dimensions, drawings, renders, references or a short brief. If needed, we help define the furniture logic as part of the interior.
02
Dimensions, materials, finishes, colours, function and quantity.
03
We look for a suitable production approach and partner for the piece.
04
We confirm the commercial and project parameters.
05
We coordinate the agreed making through suitable partners.
06
We organise delivery and realisation according to the appointed scope.
In an apartment the measurement often decides more than the catalogue: a wardrobe niche, a TV wall with cables, a dining table in a narrow living room, bathroom storage. We work toward built-in solutions that use the walls and leave movement free.
In a house or villa, furniture to project can hold one material line across several rooms — from dining and living to wardrobes and wall solutions. A larger scale does not need a louder gesture, but a calmer consistency.
A TV wall is often the first place the catalogue is not enough: cables, niches, shelves, panel and light need to work together. We help with compositions of wood, stone, metal and panels — without electrical claims beyond the installer’s brief.
A dining table carries the proportion of the room. We can look for making by length, width, top, base and finish — for a home, a villa or a hospitality space where the table follows the number of seats.
Upholstery to project helps colour, texture and silhouette follow the interior — at home, in a hotel room or in a restaurant. We do not state wear ratings that are not confirmed for the specific fabric.
For guest rooms, suites, lobby and restaurant we can help with repeatable furniture to project — headboards, wardrobes, desks, bedside pieces and seating. One specification helps the identity stay the same from room to room. The wider hotel brief is a separate page.
For a company office we look for pieces to measure where the catalogue does not cover the reception, the executive desk, the meeting table or built-in storage. The office interior as a whole is a separate service.
Tables, seating, banquettes, bar, wall panels and reception can be sourced as pieces to project — especially when count, fabric and top need to match. This is close to B2B sourcing, without repeating the trade page.
The architect and designer keep the creative concept. We help with production.
You can provide drawings, dimensions, renders, sketches, references, samples and quantities. We look for manufacturers, discuss customisation, alternative materials and delivery. Creative direction stays with you.
What you can provide
What we look for
DESIGNTURKEYPRODUCTION
Through Karanelli’s international trade experience since 2005 we can look for suitable manufacturers in Turkey for certain furniture and interior pieces with European quality. Turkey is not a mandatory route. Not every product is made there, and we do not own factories.
We do not guarantee a lower price or the shortest lead time. The benefit depends on the piece, the manufacturer and the commercial terms.
Enquiries differ in scale. We confirm the scope before production.
Private
Property
B2B
There is no published price list, because the piece is calculated from the brief. An offer needs dimensions, material, quantity and the degree of customisation.
Kërkoni një ofertë individualeDallimi shihet nga afër.
With furniture to project the attention is on the edge, the veneer, the seam, the handle and the meeting of materials. We do not give general quality guarantees beyond the terms of the specific manufacturer and offer.
We can look for custom furniture as part of a wider interior project: dimensions, materials, colour, light and the rest of the furnishing are confirmed together. If you already have a design, we take part only in production.
Lloji i mobilies, përmasat e përafërta dhe nëse ka tashmë një vizatim mjaftojnë për bisedën e parë.
Diskutoni një pjesë me porosi
Sipas prodhuesit dhe projektit: dollapë, mure TV, tavolina, tapiceri, korpuse kuzhine dhe banjo, pjesë për zyrë dhe hotel. Lista e saktë konfirmohet sipas detyrës.
Mund të ndihmojmë prodhimin sipas masave të dhëna kur prodhuesi i mbulon. Nevojiten masa, funksioni dhe, nëse ka, një vizatim.
Po. Foto, render, moodboard ose një lidhje ndihmojnë. Përshkruajini në kërkesë; skedarët i qartësojmë pas kontaktit të parë.
Po. Vizatimet, masat dhe specifikimet janë bazë e mjaftueshme. Autorësia e dizajnit mbetet te ata.
Po, brenda opsioneve të pjesës: dru, rimeso, gur, pëlhurë, metal, llak. Zgjedhja përfundimtare varet nga prodhuesi.
Po. Punojmë për një pjesë të vetme dhe për pajisje më të gjerë të një apartamenti, shtëpie ose vile.
Po. Mund të diskutojmë specifikime të përsëritshme dhe sasi projekti. Minimumet varen nga prodhuesi.
Mund të kërkojmë prodhues në Turqi kur është e përshtatshme. Jo çdo pjesë vjen që andej dhe nuk premtojmë çmim më të ulët.
Po, sipas fushëveprimit të rënë dakord. Rruga, afati dhe montimi konfirmohen në ofertë.
Nga përmasat, materiali, kompleksiteti, aksesori, pëlhura, sasia, prodhuesi dhe transporti. Pa këto nuk ka ofertë të saktë.
Me një kërkesë të shkurtër: lloji i mobilies, përmasat, sasia dhe nëse ka projekt. Pastaj konfirmojmë prodhuesin, materialet dhe kushtet tregtare.
Oak · Marble · Brass · Veneer
Na dërgoni përmasa, një vizatim, një vizualizim ose një foto reference. Do të diskutojmë materialin, prodhimin, prodhuesin dhe realizimin sipas projektit konkret.
